Step-By-Step Guide: How to Change a Flat Tire? | Benitez Auto Group

How to Change a Flat Tire? A Comprehensive Guide

Understanding the Basics

Being able to change a flat tire is an essential skill for every driver. This guide will walk you through the process of how to change a flat tire safely and efficiently. Let’s start with understanding the basic tools needed for this task.

Essential Tools

Most importantly, you will need a jack, a lug wrench, and a fully inflated spare tire. A lug wrench has a socket on one end to loosen the lug nuts and a pry bar on the other to remove the hubcap. Therefore, it is a handy tool in this process.

Safety First

Before we dive into how to change a flat tire, it’s important to ensure your safety. If you’re on the road and get a flat tire, pull over to a safe location where you’re away from traffic. Turn on your hazard lights to signal to other drivers that you’re stopped.

Steps on How to Change a Flat Tire?

Besides that, here are the steps on how to change a flat tire:

Step 1: Prepare Your Car

After you’ve pulled over, apply the parking brake to prevent the car from moving. Next, place a heavy object like a rock or brick in front of the front and back wheels.

Step 2: Loosen the Lug Nuts

Use your lug wrench to loosen the lug nuts. Do not remove them completely yet. Just break the resistance.

Step 3: Lift the Car with the Jack

Place the jack under the frame of the car near the tire that you’re going to change. If you’re unsure about where to place the jack, check your vehicle’s manual. Raise the car until the flat tire is about six inches off the ground.

Step 4: Remove the Lug Nuts and the Flat Tire

Now that the car is lifted, remove the lug nuts completely. After that, pull the tire off the hub. Pull it towards you to remove it from the car.

Step 5: Mount the Spare Tire

Place the spare tire on the hub and push it all the way in. Once it’s on the hub, put the lug nuts back on.